Liquid Leak Test A simple liquid leak test will help determine if a pipette sealing system (i.e. piston, seal, shaft, o-ring, and tip) is working as it should, and may uncover hidden problems not seen to the naked eye. 12 Point Pipette Inspection The information provided in the table below will help identify pipette parts
Read More… from General Troubleshooting – Liquid Leak Test Testing & 12 Point Pipette Inspection
Electronic Pipette Error Message All motorized electronic pipettes have an onboard program to control the performance of each pipetting action. An error message on the display means that the pipette has not been able to perform the attempted action properly. It could be due to an unfit component, like the tip, or the incorrect action
There are many brands of pipette controllers with names such as Pipet-Aid, FastPette, Accu-jet pro, S1 Pipet Filler, Easypet, etc. These are simple instruments with two functions: aspiration and dispensing. How much sample to take-up or push-out is controlled by your finger and there is no calibration adjustments on these units. The glass or plastic
Production of any material contained herein without the written permission of Pipette Supplies, Inc. is prohibited. All OEM names and models are shown or listed for compatibility and descriptive purposes only and are trademarks and property of their respective owners.
Our Story